NB Labs 1918 Ave. A Denison, Tx 75020
16 Channel JFET Headstage DB25 Pin outs = blue
Headstage channels = black
10 
11 
12 
13 
14 
15 
16 
17 
19 
21 
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
Ch 9 
Ch 10 
Ch 11 
Ch 12 
Ch 13 
Ch 14 
Ch 15 
Ch 16 
gnd 2 
st. 2 
Ch 1 
Ch 2 
Ch 3 
Ch 4 
Ch 5 
Ch 6 
Ch 7 
Ch 8 
gnd 1 
st. 1 
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
2 
3 
4 
5 
6 
7 
8 
9 
18 
20 

 

Channels 1-16 have JFETS
The ground and the stimulation channels don't have JFETS.
Ground  #1 can have a JFET if needed for differential recording. (At no extra charge.)
Note: VDD + 9v or 12v (BD25 #1)   See Fig 1.

NB Labs Headstages Amplifier FEATURES
Headstage can be built 3 ways
 
           
         
           
   
A 
B 
C 
  
     
           
           
           
 
ELECTRODE ARRAY PATTERNS Each dot represents a 50 micron wire channel and its position in the array. This is not the actual size of the array and is displayed here only as a representation.
 
 
   
   
 
 For small areas. Unlike bundles, you know which wire is which channel using this design.
2x3x3 
  
 
 For small Narrow areas. The distance between rows and individual wires can be varied to fit the need of the user.
2x4 
  
For thin areas. Also can be cut at any angle.
1x8 
  
For long narrow areas. Each row can be the same length or cut at different lengths or angles.
2x8 
  
   
A note about displaying these images. If your browser is an older version these illustrations may not be displayed. You may also get an error message. We recommend down loading the newer versions of  Netscape or  Microsoft . If you do not have the newest version of these browsers, do so you will be doing yourself a favor.
These illustrations are large pictures and would be to large to view here. To view fig click on the buttons associated with that figure.
 
     
Fig 1. 
    
Fig 2.
  
           
     
   
 
               

 

All illustrations were created using Paint Shop Pro 5.0
This page was created using Netscape Composer.
Javascript written by James Choate.
NB Labs (c) 1998